Roberts Radio MP-16CD 사용자 설명서

15

As time passes new stations may become available. To fi nd new stations 
proceed as follows:-

1.  Press and release the Auto-tune button, the display will show "Scan-

ning". Your radio will perform a scan of the UK DAB frequencies. As 
new stations are found the station counter on the right-hand side of 
the display will increase and stations will be added to the list.

2.  To carry out a full scan of the entire DAB Band III frequencies press 

and hold down the Auto-tune button for more than 2 seconds and 
then release. The display will show "Scanning". As new stations are 
found the station counter on the right-hand side of the display will 
increase and stations will be added to the list.

1

2

The different DAB information displays include a signal strength indica-
tor. This display can also be accessed directly without changing the DAB 
information type.

1.  Press and release the OK/Select button [Select button on front panel] 

the lower line of the display shows signal strength. Position your radio 
and angle the telescopic aerial for best reception using the signal 
strength display as a  guide. Move your system around and position 
so as to give maximum number of black rectangles on signal strength 
display.

2.    The clear unfi lled rectangle indicates minimum signal level required for 

satisfactory reception. Press and release the OK/Select button [Select 
button on front panel] to return to normal tuning mode. In some cases 
an external aerial may be desirable for optimal DAB reception.

 

1,2