Ricoh feeder 사용자 설명서

When You Cannot Make Copies As Wanted

29

This section explains likely causes of and possible solutions for unclear copies.

❖ Basic

Misfeeds occur frequently. The number of sheets 

loaded exceeds the capac-
ity of the machine.

Load paper only as high as the upper 
limit markings on the side fence of the 
paper tray or bypass tray. See “Copy 
Paper”, About This Machine.

Misfeeds occur frequently. The paper is damp.

Use paper that has been stored in the 
recommended temperature and hu-
midity condition. See “Copy Paper”, 
About This Machine.

Misfeeds occur frequently. The paper is too thick or 

too thin.

Use recommended paper. See “Copy 
Paper”, About This Machine.

Misfeeds occur frequently. The copy paper is 

wrinkled or has been 
folded/creased.

Use recommended paper. Use paper 
that has been stored in the recommend-
ed temperature and humidity condi-
tion. See “Copy Paper”, About This 
Machine.

Misfeeds occur frequently. Printed paper is being 

used.

Use recommended paper. Do not use 
paper that has been already copied or 
printed onto. See “Copy Paper”, About 
This Machine.

Copy paper becomes 
creased.

The paper is damp.

Use paper that has been stored in the 
recommended temperature and hu-
midity condition. See “Copy Paper”, 
About This Machine.

Copy paper becomes 
creased.

The paper is too thin.

Use recommended paper. See “Copy 
Paper”, About This Machine.

Copies are not stapled.

There are jammed staples 
in the stapler.

Copies are not stapled.

The number of copies ex-
ceeds the capacity of the 
stapler.

Check the stapler capacity. See “Sup-
plementary Informations”, Copy/Doc-
ument Server Reference.

Copies are not stapled.

Copy paper is curled.

Turn the copy paper over in the tray.

Staples are wrongly posi-
tioned.

Originals are not set cor-
rectly.

Check the correct position to place the 
originals. See “Staple”, Copy/Docu-
ment Server Reference.