Ricoh feeder 사용자 설명서
Adding paper, Toner and Staples
76
5
Changing the Paper Size in Tray 2 and 3
The following procedure explains how to change a paper size in Tray 2 and 3.
Important
❒ If a paper tray is pushed vigorously when putting it back into place, the posi-
tion of the tray's side fence may slip out of place.
❒ Check that the paper edges are aligned at the right side.
❒ Do not stack paper over the limit mark.
❒ Do not stack paper over the limit mark.
A
Check that paper in the paper tray is not being used for copying, and then
pull the tray carefully out until it stops.
pull the tray carefully out until it stops.
B
Remove paper if loaded.
C
Release the lock on the side fence.
ANQ014S
ANQ015S