RCA 25110RE3 지침 매뉴얼
2
Memory
Store up to 50 24-digit numbers in memory for quick dialing. This memory feature
is in addition to the 99 Caller ID records that can be stored in the Caller ID memory
log.
Storing a Name and Number in Memory
1. Make sure the phone is
OFF (not in TALK mode).
2. Press the Mem button.
3. Press the memory location button (01 through 50 records).
4. Press the Mem button again. The display shows ENTER NAME (up to 15
3. Press the memory location button (01 through 50 records).
4. Press the Mem button again. The display shows ENTER NAME (up to 15
characters).
NOTE: If you don’t want to enter the name, skip to step 5.
For example, to enter the name Bill Smith, press the two key twice for the letter
B, press the four key three times for the letter I, and press the five key three
times for the letter L. After one second, press the five key three times again for
the second letter L and press the one key to insert a space between the letter L
and S. Press the seven key four times for the letter S, press the six key once for
the letter M, press the four key three times for the letter I, press the eight key
once for the letter T, and press the four key twice for the letter H.
NOTE: If you make a mistake, press the del button to erase a wrong letter, and re-enter the
correct letter.
5. Press the Mem button to save the name. The display shows ENTER TEL NUMBR.
6. Use the handset touch-tone pad to enter the telephone number (up to 24 digits)
6. Use the handset touch-tone pad to enter the telephone number (up to 24 digits)
you want to store.
7. Press Mem again to store the number. You will hear a confirmation tone.
Memory