Proxim AP-4000 사용자 설명서

Related Topics

1. Download the latest software to 

 (Knowledgebase Answer ID 1250). See 

 for instructions).

1. Copy the latest software updates to your TFTP server.
2. Open the CLI interface via Telnet or a serial connection.
3. Enter the CLI password when prompted.
4. Enter the command: download <tftpaddr> <filename> img

The download will begin, and the image will be downloaded to the Access Point.

5. When the download is complete, type reboot 0 and press Enter.
NOTE: See 

The Setup Wizard helps you configure the basic AP settings required to get the unit up and running. The AP supports 
many other configuration and management options. The remainder of this user guide describes these options in detail.

• See 

 for information on configuration options that are available within the Access Point’s 

HTTP interface.

• See 

 for information on the statistics displayed within the Access Point’s HTTP interface.

• See 

 for information on the commands supported by the Access Point’s HTTP interface.

• See 

 for troubleshooting suggestions.

• See 

 for information on the CLI interface and for a list of CLI commands.