Epson EMP-1717 V11H228240LA 사용자 설명서
제품 코드
V11H228240LA
13
Changing the Projected Image
You can change the projected image in the following two ways.
• Changing by Source Search
• Changing by Source Search
The projector automatically detects signals being input from
connected equipment, and the image being input from the equipment
is projected.
connected equipment, and the image being input from the equipment
is projected.
• Changing directly
You can use the remote control buttons to change to the target input
port.
port.
Automatically Detect Incoming Signals and Change
the Projected Image (Source Search)
the Projected Image (Source Search)
You can project the target image quickly as input ports with no image
signal being input are ignored when you change by pressing the [Source
Search] button.
signal being input are ignored when you change by pressing the [Source
Search] button.
* EasyMP changes when using EMP-1715/1705.
Install the wireless LAN unit supplied (EMP-1715/1705 only).
When your video equipment is connected, start playback before beginning
this operation.
this operation.
When two or more pieces of equipment are connected, press the
[Source Search] button until the target image is projected.
[Source Search] button until the target image is projected.
Procedure
Computer
EasyMP
(EMP-1715/1705 only)
Video
S-Video
The input port where no image
signal is being input is skipped.
signal is being input is skipped.
q
The following screen showing the status of image signals is
displayed when only the image that the projector is
currently displaying is available, or when no image signal
can be found. You can select the input port where the
connected equipment you want to use is projecting. If no
operation is performed after about 10 seconds, the screen
closes.
displayed when only the image that the projector is
currently displaying is available, or when no image signal
can be found. You can select the input port where the
connected equipment you want to use is projecting. If no
operation is performed after about 10 seconds, the screen
closes.
Using the remote control
Using the control panel