Porsche 911 Carrera 사용자 설명서

Tightening torque for both wheel bolts:

130 Nm (96 ftlb.).

911 Carrera 4, 911 Carrera 4S,
911 Targa 4, 911 Targa 4S

17 mm spacers

Danger!

Risk of accident. 17 mm spacers must only

be mounted on the rear axle together with

11.5 J x 19 (67 mm rim offset) wheels.

Always remove 17 mm spacers before

mounting other wheel sizes or an emergency

spare wheel because the wheel cannot be

mounted correctly.

For information on the spacers:

page 286.

Removing the spacers

1. Unscrew the wheel bolts A with which the

spacer is fastened.

2. Remove the spacer.
3. Screw in 1 or 2 assembly aids instead of the

wheel bolts.

4. Fit wheel.

5. Insert wheel bolts A and tighten by hand.

Remove assembly aids, screw in remaining

wheel bolts. Initially tighten bolts slightly in

diagonally opposite sequence so that the

on page 285.

6. Lower the car completely.
7. Tighten wheel bolts in diagonally opposite

sequence.

Immediately after changing a wheel,

use a torque wrench to check the pre-

scribed tightening torque of the wheel bolts

(130 Nm/96 ftlb.).

290

Practical Tips, Emergency Service