Polycom Video Game Sound System Version 2.0.3B 사용자 설명서

Technical Bulletin
SoundPoint 

®

 IP, SIP 2.1

4

The following guidelines should be noted:

• You must use only *, #, or 0-9 between second and third R

• If a digit map does not comply, it is not included in the digit plan as a valid 

one. That is, no matching is done against it. 

• There is no limitation on the number of R triplet sets in a digit map. 

However, a digitmap that contains less than full number of triplet sets (for 
example, a total of 2Rs or 5Rs) is considered an invalid digit map.

• Using T in the left part of RRR syntax is not recommended. For example, 

R0TR322R should be avoided.

This configuration attribute is defined as follows:

Per-registration dial plan configuration is supported. 
The <dialplan/> attribute is described below and also includes:

 on page 

dialplan.digitmap

string compatible with 
the digit map feature of 
MGCP described in 
2.1.5 of RFC 3435. 
String is limited to 768 
characters and 30 
segments; a comma is 
also allowed; when 
reached in the digit 
map, a comma will 
turn dial tone back 
on;’+’ is allowed as a 
valid digit; extension 
letter ‘R’ is used as 
defined above.

[2-9]11

|0T|

+011xxx.T|

0[2-9]xxxxxxxxx|

+1[2-9]xxxxxxxx|

[2-9]xxxxxxxxx|

[2-9]xxxT

When this attribute is present, 
number-only dialing during the 
setup phase of new calls will be 
compared against the patterns 
therein and if a match is found, the 
call will be initiated automatically 
eliminating the need to press Send.

Attributes 
dialplan.applyToCallListDial

, 

dialplan.applyToDirectoryDial

, 

dialplan.applyToUserDial

, and 

dialplan.applyToUserSend 
control the use of match and 
replace in the dialed number in the 
different scenarios. Refer to page 2.

dialplan.digitmap.timeOut

string of positive 
integers separated by 
‘|’

3 | 3 | 3 | 3 | 3 | 3 | 3

Timeout in seconds for each 
segment of digitmap.