PLUS Vision DLPTM Technology Projector 사용자 설명서

Operation

19 

The selected source will be displayed at the bottom 
right of the screen for 3 seconds after selecting the 
source. (PC, VIDEO, S-VIDEO). 

 

The image will be frozen when the “Freeze” button is 
pressed. A “‖” mark appears at the lower right of the 
screen for 3 seconds during the freeze function. 
Furthermore, a “

4” mark appears at the lower right of 

the screen for 3 seconds when freeze is released. 
“Freeze” is released when the source button or the 
“Freeze” button is pressed again. 

Press the “Mute” button and the sound will be muted. 
There will be an OSD message as shown below. Press 
Mute again or the volume +/- buttons to turn off the 
mute. 

Press volume + or – buttons to adjust the volume. The 
OSD message below will appear. (The message will 
disappear automatically 3 seconds after the volume is 
adjusted.) 

By pressing the magnify “+” button, the center of the 
picture can be magnified. Press the button again, and the 
image will be further magnified (to a maximum of 4X). 
Press the magnify “-” button, and the size of the 
magnified image will be reduced by 50 percent. To 
return to the normal display mode, press the “Return” 
button.   

Press this button to generate the laser beam. 

If users connect the PS2 (ADB) mouse cable on the 
projector with the PC/Notebook (Macintosh/ 
Powerbook) mouse port, the disk pad will be able to 
function as a PC/Notebook (Macintosh/ Powerbook) 
mouse. When an image has been magnified, press the 
“Disk Pad” button to move around the display area (the 
mouse function is not available when magnify function is 
on). 

This button is a toggle switch to turn on/off the drag 
function of the remote mouse. 

Press this button to activate or release the blank 
function.