Philips Norelco CORDLESS TRIPLE HEADER RAZOR 8020X 사용자 설명서

 

  may dent or damage precision-made slotted  

combs.

◗

    Do not use razor if combs are damaged or 

broken. Facial injury may occur.

 

◗

    Never dry the shaving unit with a towel or 

tissue as this may damage razor heads.

 

◗

    Do not use abrasives, scourers or liquids such 

as acetone to clean the appliances.  

 

◗

It is recommended that you clean the Razor  

Head Assembly thoroughly after each use to  

maintain optimal shaving performance.

 

1 

Press the on/off button to turn razor oN.

C

 

 

Rinse Razor Head Assembly under hot 

tap water by letting the water run in and 

around all the openings for at least 30 

seconds.

C

 

  You can also immerse the Razor Head 

Assembly in hot water for at least 30 

seconds. 

Make sure the razor is ON to thoroughly remove 

any residue.

BE CAREFUL TO TEST WATER FIRST SO AS NOT 
TO BURN OR SCALD HANDS.

 

   Turn  razor oFF and shake off excess 

water.

18

 

   You can store the razor in the charging 

stand.

 

   Put the Protective Razor Head Cap on 

razor to protect heads.

Note: If lotion build-up has occurred, remove 

Razor Head Assembly and soak for a few minutes 

under hot water or a degreasing liquid (e.g. 

alcohol). Be sure to thoroughly rinse Razor Head 

Assembly under tap water before using razor.

Do not mix up the cutters and combs as the 

shaving performance may be adversely affected 

for several weeks before optimal shaving 

performance is restored.

 

  Turn razor oFF.

C

 

  Remove Razor Head Assembly from razor 

by pulling Razor Head Assembly straight 

up from razor.

C

 

  Using your thumb and forefinger turn the 

razor head clockwise and lift the comb off 

of Razor Head Assembly.

 

  Remove and clean one set of cutters and 

combs at a time.

19

6

0

1