Pelco ENDURA NET5400T 사용자 설명서
20
C4659M (4/10)
SELECTING THE SECURE SOCKETS LAYER MODE
Figure 2. SSL Configuration Page
1. Place your mouse pointer over the Network tab.
2. Select SSL from the drop-down menu.
3. Select one of the following modes:
Required: A signed Secure Sockets Layer (SSL) certificate must be installed, and a secure URL that begins with the protocol name “https:”
must be used to access the encoder. Sensitive data is always encrypted during transmission. A URL that begins with the "http:" protocol
rather than the “https:” protocol will be redirected to the secure URL automatically.
must be used to access the encoder. Sensitive data is always encrypted during transmission. A URL that begins with the "http:" protocol
rather than the “https:” protocol will be redirected to the secure URL automatically.
Optional: A signed SSL certificate must be installed, but a secure URL that begins with the protocol name “https:” is optional when
accessing the encoder. You can also access the encoder using a standard URL with the “http:” protocol, but sensitive data is not encrypted
during transmission. To ensure that sensitive data is encrypted, you must use a secure URL with the “https:” protocol.
accessing the encoder. You can also access the encoder using a standard URL with the “http:” protocol, but sensitive data is not encrypted
during transmission. To ensure that sensitive data is encrypted, you must use a secure URL with the “https:” protocol.
Disabled (default): Turns off access to the Web client through SSL. Sensitive data will not be encrypted during transmission.
NOTE: If the SSL mode is set to disabled, you cannot access the encoder using a URL that begins with an “https:” protocol. Your Web browser
displays an error message if you do not type the encoder URL correctly.
displays an error message if you do not type the encoder URL correctly.
Refer to the following sections for more information:
•
•