Transition Networks BFFG1XXX-1XX 사용자 설명서
Transition Networks
Section live:
Initial Device Setup
Introduction
There are four ways to set up the FBRM/BFFG 1xxx-1xx Devices before the Device
can be operated and managed:
can be operated and managed:
• USB CLI
• Telnet
• Chassis MMU (chassis model)
• IP-based (directly to FBRM/BFFG)
• Telnet
• Chassis MMU (chassis model)
• IP-based (directly to FBRM/BFFG)
The factory default IP configuration is the following:
• IP address:
192.168.1.1
• Subnet Mask: 255.255.255.0
• Gateway: 192.168.1.2
• Gateway: 192.168.1.2
In this section
These are the topics:
Topic
See Page
USB CLI access
33
Initial Device setup via USB CLI
35
Initial Device setup via Telnet (directly to Device) 38
Initial Device setup via chassis agent (MMU) web-based
Initial Device setup via chassis agent (MMU) web-based
41
Initial Device setup via IP web-based (directly to Device) 44
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
32