Paradyne 9820 사용자 설명서

FTP Operation

9820-A2-GB20-20

June 2000

"

To initiate an FTP session:

1. Start the FTP client program on your host. For example, on a UNIX host,

type ftp, followed by the FrameSaver unit’s IP address.

2. If a login and password are required (see 

Security and Logins), you are prompted to enter them. If not, press Enter.

The FTP prompt appears.

The starting directory is the root directory ( / ). Use standard FTP commands
during the FTP session, as well as the following remote FTP commands.

cd 

directory

Change the current directory on the FrameSaver node to the
specified 

directory.

dir [

directory]

Print a listing of the directory contents in the specified 

directory.

If no directory is specified, the current one is used.

get 

file1 [file2]

Copy a file from the remote directory of the FrameSaver node
to the local directory on the host (for configuration files only).

remotehelp
[

command ]

Print the meaning of the command. If no argument is given, a
list of all known commands is printed.

ls [

directory]

Print an abbreviated list of the specified directory’s contents.
If no directory is specified, the current one is used.

put 

file1 [file2]

Copy

 file1 from a local directory on the host to file 2 in the

current directory of the FrameSaver node. If 

file2 is not

specified, the file will be named 

file1 on the FrameSaver node.

recv 

file1 [file 2]

Same as a get.

send 

file1 [file 2]

Same as a put.

pwd

Print the name of the current directory of the FrameSaver unit
node.

bin

Places the FTP session in binary-transfer mode.