Transcend Information T.sonicTM 820 820 사용자 설명서
7
Basic Operation
Before using the T.sonic
™
820 for the first time you need to charge the internal battery for
at least 12 hours by plugging it into a computer using the Mini USB to USB A-Type cable.
Charging the Battery
Plug the small end of the Mini USB to USB A-Type cable into the Mini USB connector on the T.sonic
™
820
and plug the large end of the cable into an available USB port on your desktop, or notebook computer.
The T.sonic
The T.sonic
™
820
’s internal Li-ion battery will begin charging.
Figure 2. Connecting to a Computer
Power ON
Press and Hold the “POWER ON-OFF” button
to Power ON the T.sonic
™
820
. An animated logo
will appear on the Color OLED Display. After the startup screen disappears the player will revert to the
default MUSIC Mode screen, you can now begin to use the T.sonic
™
820
.
It takes a few seconds to Power ON the unit.
When powering on the unit, if the LOCK icon
appears on the OLED Display, this means that the
T.sonic
™
820
’s “LOCK” switch is on. You must switch off the “LOCK” before you can Power ON the
T.sonic
™
820
.
Player Controls