Transcend Information T.sonicTM 820 820 사용자 설명서

38 

The quality of an audio recording can be set to Low (8,000Hz), Medium (16,000Hz), or High (32,000Hz), 

but the higher you set the Recording Quality the greater the memory space required to save the resulting 

WAV file. 

In the SETTINGS  Menu, press the “Volume Up” 

 / “Volume Down” 

, or “Next-Fast 

 

 / “Back-Fast Rewind” 

 buttons to select the REC Quality icon, then press the 

 button 

  to enter the REC QUALITY Mode. 

 

Press the “Volume Up” button 

, or “Volume Down” button 

 to switch between the 3 

 settings: Low – Med – High. Press the “PLAY/PAUSE” button 

  to select the 

 level and return to the SETTINGS Menu. 

 

Low (8KHz) 

1 (stereo/mono) 

64/128 hrs 

128/256 hrs 

Med (16KHz) 

1 (stereo/mono) 

32/64 hrs 

64/128 hrs 

High (32KHz) 

1 (stereo/mono) 

16/32 hrs 

32/64 hrs 

 

If not enough memory space is available, or the battery power is too low, the T.sonic

 cannot 

support the maximum recording capacity as outlined in the above table. 

 

The closer you move the T.sonic

’s Microphone to the source of the sound the higher the quality 

of the recording. 

 

RADIO Recordings are recorded in Stereo. MIC Recordings are recorded in Mono. Line-In 
Recordings are recorded in Stereo, or Mono depending on the Line-In device that is used.