TP-LINK TL-PA6010KIT 사용자 가이드
TL-PA6010
AV600 Gigabit Powerline Adapter
5
Pair Button
Pair buttons are used to secure a powerline network. To secure
your network, please follow the steps below. Firstly, plug in a new
adapter, and press its pair button for one second; then plug in
another adapter and press its pair button for one second as well.
The two buttons should be pressed within 2 minutes of each other.
After that, wait about 60 seconds so that the two adapters can finish
connecting.
your network, please follow the steps below. Firstly, plug in a new
adapter, and press its pair button for one second; then plug in
another adapter and press its pair button for one second as well.
The two buttons should be pressed within 2 minutes of each other.
After that, wait about 60 seconds so that the two adapters can finish
connecting.
* The provided power plug may differ from the picture due to different regional power specifications. Here
we take the EU version as an example.
we take the EU version as an example.
)
Note:
1. If the pair button is pressed till all the LEDs turn off (about 10 seconds), the powerline adapter will
leave the network which it has joined and its new network name assumes a random value. The
Power LED turns off when it disconnects from the powerline network.
Power LED turns off when it disconnects from the powerline network.
2. For detailed information about the pair button, please refer to
.