Palsonic DVD R 212 사용자 설명서
Recording Mode
17
2. Use the corresponding function keys of the remote controller, such as "RECORD", "PAUSE/STEP" and
"STOP" to select from "Record, "Pause" and "Stop" functions in the recording process.
"STOP" to select from "Record, "Pause" and "Stop" functions in the recording process.
When a "Stop" operation is done, the system will write some information into the disc. The system will
not respond to any button pressing at that time.
When you resume recording after the "Stop" operation, the system will add a title. If there is no
interruption in the recording process from the beginning to the end, then only one title is available for
the entire disc.
not respond to any button pressing at that time.
When you resume recording after the "Stop" operation, the system will add a title. If there is no
interruption in the recording process from the beginning to the end, then only one title is available for
the entire disc.
This function enables you to set up the timer during the recording process. Once the scheduled time is
reached, the system will stop recording automatically.
1. Enter the "Recording Mode" and start recording.
2. For desired timer recording, press the "REC/OTR" button once or several times.
reached, the system will stop recording automatically.
1. Enter the "Recording Mode" and start recording.
2. For desired timer recording, press the "REC/OTR" button once or several times.
The recording time will increase by 30 minutes with every pressing of the "REC/OTR" button. If the
scheduled time exceeds the recordable time of the disc, normal recording mode will restore.
If the timer recording is paused or stopped, the system will cancel the timer recording process.
scheduled time exceeds the recordable time of the disc, normal recording mode will restore.
If the timer recording is paused or stopped, the system will cancel the timer recording process.
1. This unit can realise real-time monitoring and recording for a DV through the IEEE 1394 serial port (DV).
Connect the DV to the unit (for details, see "System Connection: System Connection for Recording
External Signals") by the front panel inputs.
Switch on the power of the unit.
Press the "DV" button.
Switch on the "Power" button of the DV, set it to the "CAMERA" mode, and start monitoring.
Press the "REC/OTR" button to start recording. (Other operations is the same as in the Recording
Mode).
External Signals") by the front panel inputs.
Switch on the power of the unit.
Press the "DV" button.
Switch on the "Power" button of the DV, set it to the "CAMERA" mode, and start monitoring.
Press the "REC/OTR" button to start recording. (Other operations is the same as in the Recording
Mode).
2. This unit can also record the VCR content of the DV.
The connection method is the same as stated in the first 3 steps of 1.
Switch on the "Power" button of the DV to enter the VCR status, and the VCR status is "Stop".
Use the remote controller of the unit to complete the operations of the DV, including STOP, PLAY,
PAUSE, FB, FF, etc.
Press the "REC/OTR" button and then press the "PLAY" button to start recording.
During the recording process, press the "PAUSE" button to suspend recording of the unit, and press the
button again to suspend the DV. To restore play of the DV, press the "PLAY" button; if you press the
"REC/OTR" button, the play of the DV and the recording of the unit will resume at the same time; press
the "FWD", "REV" button to complete forward or rewind operation for the DV, while it reports Pause
status to the unit; If you press the "STOP" button, the recording of the unit will stop first, and press
again to stop the play of the DV.
Switch on the "Power" button of the DV to enter the VCR status, and the VCR status is "Stop".
Use the remote controller of the unit to complete the operations of the DV, including STOP, PLAY,
PAUSE, FB, FF, etc.
Press the "REC/OTR" button and then press the "PLAY" button to start recording.
During the recording process, press the "PAUSE" button to suspend recording of the unit, and press the
button again to suspend the DV. To restore play of the DV, press the "PLAY" button; if you press the
"REC/OTR" button, the play of the DV and the recording of the unit will resume at the same time; press
the "FWD", "REV" button to complete forward or rewind operation for the DV, while it reports Pause
status to the unit; If you press the "STOP" button, the recording of the unit will stop first, and press
again to stop the play of the DV.
Caution:
Do not move the unit or switch off the power during the recording process.
The finalised DVD+R disc shall not be recorded.
Be sure to switch off the power of the unit and the DV before connecting the DV cables.
The finalised DVD+R disc shall not be recorded.
Be sure to switch off the power of the unit and the DV before connecting the DV cables.
Recording Process Control (continued)
One Touch Recording (OTR)
DV Controlled Recording