Panasonic Attune II 작동 가이드
16
Setting the unit
wManager mode
p The manager can interrupt store personnel’s TALK or
PAGE at any time by monopolizing one channel by
priority.
priority.
p Only 1 unit of this product or the All-In-One Headset can
be set to manager mode. Complete ID Registration, to do
this setting.
this setting.
Hold down the [POWER] button for 2 seconds
or more to turn off the Belt Pack.
or more to turn off the Belt Pack.
Press the [POWER] button for 1 second or
more while holding down the [R] and [T1]
buttons to turn on the power.
more while holding down the [R] and [T1]
buttons to turn on the power.
p You can hear “Connecting Center Module A” and
power indicator turns red and green alternately. Also
the lane indicator blinks orange.
the lane indicator blinks orange.
In dual lane operation
Settings for Lane B must also be performed.
Press the [POWER] button for 1 second or
more while holding down the [R] and [T2]
buttons to turn on the power.
more while holding down the [R] and [T2]
buttons to turn on the power.
p You can hear “Connecting Center Module B” and
power indicator turns red and green alternately. Also
the lane indicator blinks green.
the lane indicator blinks green.
If manager mode setting is successful, you can
hear “Manager” and the power indicator blinks
green.
hear “Manager” and the power indicator blinks
green.
p If there is a problem setting the manager mode
settings, an error beep and the voice message
“Failed” are heard from the speaker of the
headset, and the power indicator blinks red to
alert the user the abnormal state. If that happens,
retry from step 1.
“Failed” are heard from the speaker of the
headset, and the power indicator blinks red to
alert the user the abnormal state. If that happens,
retry from step 1.
p Only 1 unit of this product or the All-In-One Headset
can be set to manager mode per lane. If a second unit
is set to manager mode, the manager mode setting
on the first unit is automatically cancelled.
is set to manager mode, the manager mode setting
on the first unit is automatically cancelled.
Note
wCanceling the manager mode
Turn off the Belt Pack that has been set for the
manager mode.
manager mode.
Press the [POWER] button for 1 second or
more while holding down the [R] and [T1]
buttons to turn on the power.
more while holding down the [R] and [T1]
buttons to turn on the power.
p You can hear “Connecting Center Module A” and
power indicator turns red and green alternately. Also
the lane indicator blinks orange.
the lane indicator blinks orange.
In dual lane operation
Canceling of the manager mode should be performed.
Press the [POWER] button for 1 second or
more while holding down the [R] and [T2]
buttons to turn on the power.
more while holding down the [R] and [T2]
buttons to turn on the power.
p You can hear “Connecting Center Module B” and
power indicator turns red and green alternately. Also
the lane indicator blinks green.
the lane indicator blinks green.
When manager mode is cancelled, the unit
returns to the normal condition, and the power
indicator turns green.
returns to the normal condition, and the power
indicator turns green.
p If there is a problem canceling the manager mode
settings, an error beep and the voice message
“Failed” are heard from the speaker of the
headset, and the power indicator blinks red to
alert the user the abnormal state. If that happens,
retry from step 1.
“Failed” are heard from the speaker of the
headset, and the power indicator blinks red to
alert the user the abnormal state. If that happens,
retry from step 1.