Panasonic Arbitrator 360 작동 가이드
Control Reference Guide of the Remote Control Panel
LCD panel
Shows images and operation menus.
AUTO ZOOM button
*
1,
*
2
Provides automatic control of zoom-in, pause and zoom-
out operation.
The officer can set zoom ratio and pause time.
BOOK MARK button
*
2
Press during recording or playback to enter bookmarks.
A set bookmark displays an icon on the display for 1
to 2 seconds when pressed.
Backlight compensation button ( )
*
1,
*
2
Press to compensate for strong backlighting. This button
toggles between ON and OFF at each press.
Zoom buttons
*
1,
*
2
Use these buttons to zoom out (W-button) and zoom in
(T-button).
REC lamp
Lights or flashes during recording.
REC button
*
2
Press to start recording video and sound to SDHC
Memory Cards.
STOP button ( )
*
2
Stops recording.
AUDIO 2 MUTE button/lamp
Starts/releases recording for Audio2. Pressing this button
turns the lamp on/off. While the lamp is lit, Audio2 is not
being recorded.
If “Audio2” on the Audio Allocation screen is set to OFF,
the button operation is disabled.
IR MODE button
*
1
Switches the IR mode to one of the following modes.
AUTO : Automatically changes IR mode depending on
ambient brightness.
ON : Turns on the IR mode.
OFF : Turns off the IR mode.
Front panel
R E T U R N M E N U
C O N T R O L P A N E L
O N /
O F F
CAMERA SELECT button
Each press of the button toggles the displayed picture
between Main and Sub.
If you hold the button pressed for more than two
seconds, the preset mode set on the Video Allocation
screen in Administrator setup (see page 9) (Preset1,
Preset2, or Preset3) is switched.
Note:
When you switch the preset mode, noise may occur in video.
Volume control buttons ( )
Adjusts speaker sound volume of the Remote Control
Panel.
Brightness buttons ( )
Adjusts LCD panel brightness.
CONTROL PANEL ON/OFF button
Turns on and off the LCD panel, lamp indications and
buttons when the Memory Card Video Recorder is on.
It cannot turn on or off the Memory Card Video Recorder
or Remote Control Panel.
LIVE/ARCHIVE button
Switches between the live and playback screen. Press
this button to open the Live screen when the “Information”
screen, “Archive” screen, Officer setup top screen or
Setup/Admin top screen is displayed.
Skip back button ( )
Press to return playback to the previous skip location.
Skip forward button ( )
Press to move playback to the next skip location.
RETURN button
Returns to the previous menu or screen.
MENU button
Opens menus on the LCD panel.
*
1 Commercially available cameras connected to the [CAMERA 2],
[3], [4], [5] and [] connectors cannot be controlled.
*
2 The lamp turns on when the [CONTROL PANEL ON/OFF] button
is set to ON.
Playback with the remote control panel is not available
at present. Upgrading is scheduled for the future.
For playback, it is recommended to use the Front-End
application or Back-End Client application.