THB Bury LT 9100 사용자 설명서
4
5
will switch to standby mode, in order to reduce power consumption. All
available functions can be used via the Twin-Phone until you disable
external SIM access.
available functions can be used via the Twin-Phone until you disable
external SIM access.
The HF profile (hands-free profile) provides a second connection opti-
on. Here, connections are established via your mobile’s GSM network.
The mobile phone can be used as usual.
on. Here, connections are established via your mobile’s GSM network.
The mobile phone can be used as usual.
The SIM card slot
The SIM card slot inside the Twin-Phone is the component in which the
SIM card is inserted. Through this, the Twin-Phone can read the data
stored on your SIM card (e.g. phonebook entries).
The SIM card slot inside the Twin-Phone is the component in which the
SIM card is inserted. Through this, the Twin-Phone can read the data
stored on your SIM card (e.g. phonebook entries).
You can insert the SIM card into the back of the Twin-Phone. In order
to do so, remove the device from the hang-up cup.
to do so, remove the device from the hang-up cup.
Open the sliding element on the back of the Twin-Phone in a
downward movement as indicated by the arrow.
Open the black flap. The flap will flip open by pressing the
small vertical, rectangular button – marked with PUSH OPEN.
Now, you can insert a SIM and/or a TWIN card into the inside
of the flap. Please make sure that the topside of the SIM card
(with the memory chip) is facing upwards when inserting it in
the flap. It must be on the visible side. The SIM card edge
with the bevelled corner must face upwards.
Close the flap. Press the Push mark on the flap. The flap will
snap and close.
Push the sliding element back until it locks. The local SIM card
is now ready for use. Place the device back in the hang-up
cup.
downward movement as indicated by the arrow.
Open the black flap. The flap will flip open by pressing the
small vertical, rectangular button – marked with PUSH OPEN.
Now, you can insert a SIM and/or a TWIN card into the inside
of the flap. Please make sure that the topside of the SIM card
(with the memory chip) is facing upwards when inserting it in
the flap. It must be on the visible side. The SIM card edge
with the bevelled corner must face upwards.
Close the flap. Press the Push mark on the flap. The flap will
snap and close.
Push the sliding element back until it locks. The local SIM card
is now ready for use. Place the device back in the hang-up
cup.
1.
2.
3.
4.
5.
Display
Telematic key (info number) for
speed dialling
4. Description of the Twin-Phone
Device description and installation
Telematic key (service number) for
speed dialling
The Twin-Phone
The Twin-Phone is a high quality connecting unit for a Bury hands-free car kit (a base unit from the UNI
System 8). The large high-contrast display shows all menu and telephone functions (depending on
mobile model).
The Twin-Phone is a high quality connecting unit for a Bury hands-free car kit (a base unit from the UNI
System 8). The large high-contrast display shows all menu and telephone functions (depending on
mobile model).
You can also insert a SIM card in the Twin-Phone in order to use it as an independent phone (only in-
side the vehicle).
side the vehicle).
The Twin-Phone also allows you to connect a mobile phone via the Bluetooth interface. For this, you
can use different profiles (transmission protocols, HFP and SAP).
can use different profiles (transmission protocols, HFP and SAP).
If you connect the Twin-Phone to a mobile phone using the SAP profile (SIM Access profile), the inte-
grated GSM module will access the SIM card in your mobile. This will render the mobile inactive, i.e. it
grated GSM module will access the SIM card in your mobile. This will render the mobile inactive, i.e. it