Technicolor - Thomson DTH 8540 사용자 설명서
65
EN
EN
Menus
Standby mode
Your DVD recorder has an Eco Standby to reduce its power consumption
when on stand-by. Select Eco. Standby to enable this function.
when on stand-by. Select Eco. Standby to enable this function.
Note
:
the Eco function does not allow the display of programming warning messages
on the display panel. Only the record icon will flash.
AV link
Allows a television set to control your DVD recorder and download the
same channels to the same numbers during installation of channels (page 6).
same channels to the same numbers during installation of channels (page 6).
Note
:
this function is positioned by default on On.
AV2 Input
Choose the S-Video or Video signal, depending on the device connected to
the AV2 Scart socket (usually a satellite or cable receiver), select RGB,
S-Video or CVBS. If you do not know the type of signal supplied by the
connected device, try each of the settings to obtain the best result.
the AV2 Scart socket (usually a satellite or cable receiver), select RGB,
S-Video or CVBS. If you do not know the type of signal supplied by the
connected device, try each of the settings to obtain the best result.
Note
:
format of image signals:
RGB: English signal colour code (Red – Green – Blue). This is best quality.
S-Video S-VHS (Y/C), signals with separate colour components and brightness. This is
average quality.
S-Video S-VHS (Y/C), signals with separate colour components and brightness. This is
average quality.
CVBS: composite video signals. This is poor quality.
Scart connector
2_DTH8540-50_en.qxd 11/08/05 11:40 Page 65