Tandberg Data PRECISIONHD 1080P 사용자 설명서

다운로드
페이지 29
D14640.01—MARCH 2010 
17
TANDBERG PrecisionHD 1080p/720p camera
Camera User Guide
Contents
Introduction
Physical interface
Cables
Connecti to codec
Video formats
Daisy chaining
Appendices
Contact us
www.tandberg.com
Example. TANDBERG PrecisionHD 1080p 12X/4X cameras in daisy chain. 
Daisy chaining of the 
PrecisionHD 1080p 
12X/4X
A single daisy chain with PrecisionHD 1080p 
12X can have:
• 
Three cameras when using Codec C60. 
• 
Seven cameras when using Codec C90. 
The PrecisionHD 1080p 4X has daisy chain 
support, but can only be in the end of a chain.
Locate the Extra Camera and Power 
connectors.
• 
Power. The first camera in the chain is 
powered up from the codec by the VISCA 
camera control cable. Additional cameras 
must use the 12V DC Power in.
• 
Extra camera cable. The daisy chained 
cameras are connected by using the VISCA 
Extra Camera cable (maximum length 20 m 
/ 65.6 ft) between the Extra Camera In and 
Codec Control In sockets.
• 
HDMI and HD-SDI. The HDMI and HD-SDI 
outputs can be used simultaneously on the 
same camera.
Main 
camera
Second 
camera
Third 
camera
Power in
12V DC
Power in
12V DC
Connect to the 
Camera Control 
socket on the 
codec.
RJ11–RJ45
HDMI out:
Connect to the  
Video Input 2 
on the codec
HDMI out: 
Connect to the  
Video Input 1 
on the codec
HDMI out:
Connect to the  
Video Input 3 
on the codec
RJ11–RJ45
VISCA™ is a trademark of Sony Corporation
You can connect 
up to three 
cameras with 
Codec C60 and up 
to seven cameras 
with Codec C90
RJ11–RJ45
Contact us
Contents
Introduction
Cables
Daisy chaining
Appendices
Physical interface
Connect to codec
Video formats
Daisy chaining