Tandberg Data Data Network Router MSE 8321 사용자 설명서

8

All administration of the ISDN gateway is performed via the web interface. 
To log in to the ISDN gateway:
1

Log in to the Supervisor’s web interface.

2

Go  to 

 and click the IP address of the ISDN gateway.

3

Click 

, and then click

 and enter the user 

name 

 with no password. 

1

In the web interface, go to

. 

2

Select the 

 to match that of your installation; E1 is typically 

used in the UK and mainland Europe, T1 (USA and Canada) in North America, 
and T1(Japan) in Japan.

3

Complete the other settings as required by your network, referring to the online 
help for further information.

4

Click 

 to save any changes you have made to the configuration.

5

Restart the ISDN gateway (this is only necessary if you changed the ISDN 
configuration). To do this:
i

Go  to 

, and click 

. 

ii

Confirm that you want to shut down the ISDN gateway.

iii Click 

.

6

When the ISDN gateway has restarted, log in to the web interface again, and go 
to 

.

7

Complete the settings for ISDN Port 1 as required by your network, referring to 
the online help for further information. Note that all ISDN ports on the ISDN 
gateway are enabled by default.

8

Click 

 to save your configuration changes to the ISDN port. 

9

If required, configure another ISDN port by selecting the port number from the 
numbered links at the top right of the ISDN port configuration page.

Codian recommends that you change the admin account to use a 
password as soon as possible. To do that, go to 

, click the 

 

link, and provide the required user information.