TANDBERG 8000 MXP 사용자 설명서

Administrator Settings 

191 

Sub address  
  
Using a sub address enables you to connect up to eight ISDN terminals to the same ISDN 
telephone number and line. The terminals are addressed by using different sub addresses. To 
call a terminal with a sub address, separate the ISDN telephone number and the sub address 
with a ‘*’. Note that this service is dependent on your service provider and has limited access on 
some ISDN networks. 
 

 
Example:  12345678*2 (up to four digit sub addresses are possible). 
 

 
Validate Numbers / MSN (Multiple Subscriber Number) 

   

The use of MSN (Multiple Subscriber Number) enables you to attach different ISDN terminals, 
with different numbers, to the same physical ISDN telephone line. If Validate Numbers is set to 
"On" only calls to those numbers specified in the Line Setup menus will be answered. If available 
this service can be ordered from your telephone company. 
 
Parallel dial 
 

Channels will be dialed and connected in parallel when setting up a BONDING call.  
 

Off  

Channels will be dialed one by one, which may increase the dialing time. 
 

     
Send Own Numbers  
 

The system will send its own numbers to the far end. 
 

The system will not send its own numbers to the far end, but please note that the 
network may still send your numbers to the far end. 
 

 
Sending Complete  
 

The system will send the ISDN message information element Sending Complete. 
 

The system will not send Sending Complete. Default is “Off”