TANDBERG 8000 MXP 사용자 설명서

General Use 

69 

 

 

 
Focus, Brightness and White balance are set for auto focus, auto brightness and auto white 
balance by default. If you need to set focus, brightness and white balance manually, go to Picture 
Control in the Camera Control menu. 
 
Focus 
 

Auto focus continuously updates the focus throughout the call. When moving 
the camera, the system will use auto focus for 5 seconds to set the right focus 
of the new camera position. After 5 seconds auto focus is turned off to prevent 
continuous focus adjustments of the camera. 
 

Temporary 
 

When Temporary is selected, the slide bar is enabled. Use the arrow keys to 
adjust the focus. The temporary focus will last until you move the camera again 
and auto focus will take effect. 
 

 
Camera Brightness 
 

Auto brightness continuously updates the brightness of the camera picture. 
 

When Manual is selected, the slide bar is enabled. Use the arrow keys to manually 
adjust the camera brightness. If brightness is set manually, the system will keep 
this brightness level also when the camera is moved. 
 

 
White balance 
 

Auto white balance continuously updates the white balance. 
 

When Manual is selected, the “Set White balance” field is enabled. To update the 
white balance manually, select Manual. A white object should be held in front of 
the camera a few seconds before and after pressing “Set White balance”. If white 
balance is set manually, the system will keep this white balance also when the 
camera is moved.