Optiquest iRIS 220 사용자 설명서
27
-
iRIS 220 / iRIS 320, V1.19 User Guide
4.3.4 GPRS/CDMA-1X Cfg (Level 3)
The GPRS/CDMA-1X set-up menu is for configuring the specific GPRS/CDMA-1X connection settings.
* GPRS/CDMA-1X Cfg
0 Exit
0 Exit
1 APN [iquest.co.nz] (for GPRS)
- Reserved – (for CDMA)
2 LogIn [,]
3 Skt A IP [0.0.0.0]
3 Skt A IP [0.0.0.0]
4 Skt A Port [7778]
5 Skt B IP [0.0.0.0]
6 Skt B Port [7777]
7 IP Acceptance
8 Schedule
9 Network Info
7 IP Acceptance
8 Schedule
9 Network Info
>
Option 0
Select this option to return to the Comms Cfg menu.
Option 1
When this option is selected you will be prompted to enter a GPRS APN (Access Point Name). This option
is not applicable for CDMA - the menu entry will be – Reserved - and this choice will be ignored.
is not applicable for CDMA - the menu entry will be – Reserved - and this choice will be ignored.
> APN=
Enter the name of the APN allocated by your GPRS network provider (e.g. iquest.co.nz).
Option 2
This option is where the GPRS/CDMA-1X login parameters (user name and password) are configured.
When this option is selected you will be prompted firstly to enter a user name, then a password. Many
providers do not require any login credentials, in which case these parameters should be set to empty.
Press Esc then Enter to enter an empty string.
When this option is selected you will be prompted firstly to enter a user name, then a password. Many
providers do not require any login credentials, in which case these parameters should be set to empty.
Press Esc then Enter to enter an empty string.
> User Name=
Enter the user name required by your GPRS/CDMA-1X network provider.
> Password=
Enter the password required by your GPRS/CDMA-1X network provider.
Option 3
When this option is selected you will be prompted to enter an IP address to use for socket A. The iRIS uses
Socket A for ASCII communication. This is the destination IP address used for unsolicited ASCII calls.
Socket A for ASCII communication. This is the destination IP address used for unsolicited ASCII calls.
> Skt A IP=
Enter the remote IP address you want to have ASCII messages delivered to by default.
Option 4
When this option is selected you will be prompted to enter a port number to use for socket A.
> Skt A Port=
Enter the remote port number that you want to have ASCII messages delivered to by default (e.g. 7778).