Optiquest iRIS 220 사용자 설명서

iRIS 220 / iRIS 320, V1.19 User Guide

Option 5

The  option  allows  an  alternative  trigger  for  automatic  sending  of  data  when  the  base  type  is  set  to  “Auto
Send”. (See option 3 of section 4.3.3 for details on the base type).  By setting a non-zero value, the iRIS will
automatically connect and send its data when at least x samples have been logged. If this setting is zero, the
schedule is the only method of triggering automatic data reporting.

> Send when x samples=

Option 6

When the base type is set to “Auto Send”, this option defines what information the automatic packet
contains. By default, the data will only consist of logged data (value = 0), however it possibly to also have the
iRIS time/date and/or pointers reported as well. Enter a value that is the sum of the options.

> Data Format (+0:Samples only +1:Time +2:Ptrs)=

4.3.8 Sensor Selection (Level 2)

The Sensor Selection menu is where you select the sensor that you want to configure. From this menu, you
can see at a glance which sensors are enabled for logging and if enabled, their source and name.

* Sensor Cfg
0 Exit

1 Sen1 (Dis)

2 Sen2 (Dis)

3 Sen3 (Dis)

4 Sen4 (Dis)

5 Sen5 (Dis)

6 Sen6 (Dis)

7 Batt (Dis)

8 Supp (Dis)

9 Temp (Dis)

Option 0

Select this option to return to the main menu.

Option 1

Select this option to display the set-up menu for Sensor 1.

Option 2

Select this option to display the set-up menu for Sensor 2.

Option 3

Select this option to display the set-up menu for Sensor 3.

Option 4

Select this option to display the set-up menu for Sensor 4.

Option 5

Select this option to display the set-up menu for Sensor 5.

Option 6

Select this option to display the set-up menu for Sensor 6.

Option 7

Select this option to display the set-up menu for Sensor 7 (Battery Voltage).

Option 8

Select this option to display the set-up menu for Sensor 8 (Supply Voltage).

Option 9

Select this option to display the set-up menu for Sensor 9 (Temperature).