Optimus CDG 사용자 설명서

다운로드
페이지 28
11
6. Adjust the sound with 
MASTER
 
VOL-
UME
. See “Adjusting the Sound” on
Page 12.
7. Set each connected microphone’s
ON/OFF
 switch to 
ON
. Sing directly
into the microphone along with the
music.
8. Use 
MIC VOL 1 
and/or 
MIC VOL 2 
to
adjust the volume of each micro-
phone.
9. Adjust 
ECHO
 and 
TONE CONTROL
for the desired reverberation and
pitch. See “Adjusting the Sound” on
Page 12.
10. Adjust 
TAPE SPEED (
if you are play-
ing a tape). See “Adjusting the
Sound” on Page 12.
11. To stop a tape, press 
STOP/EJECT
 on the deck you are using.
Press 
STOP/EJECT 
 again to
open the cassette compartment
door and remove the tape.
12. Set each microphone’s 
ON/OFF
switch to 
OFF
, then press 
POWER
 to
turn off the system. The POWER
indicator turns off.
WITH ANOTHER AUDIO 
SOURCE
If you connect another audio source, fol-
low these steps to sing along with that
audio source.
1. Set 
FUNCTION SELECTOR 
to 
AUX
.
2. Press 
POWER
 to turn on the system.
The POWER indicator lights.
3. Turn on the audio source.
4. Adjust the sound with the controls
explained in “Adjusting the Sound”
on Page 12.
5. Set each connected microphone’s
ON/OFF
 switch to 
ON
. Sing directly
into the microphone along with the
music. 
6. Use 
MIC VOL 1 
and/or 
MIC VOL 2 
to
adjust your voice’s volume.
7. When you finish, set each micro-
phone’s ON/OFF switch to OFF,
press 
POWER
 to turn off the system,
then turn off the audio source.
THROUGH ANOTHER 
AUDIO COMPONENT
If you connected another audio compo-
nent, follow the steps in “With Another
Audio Source” so you can hear your
voice and music through another com-
ponent. Except in Step 3, turn on the au-
dio component, and be sure to turn it off
(Step 7) when you finish.
32-1166.fm  Page 11  Wednesday, November 17, 1999  4:51 PM