Optimus CDG 사용자 설명서
17
CASSETTE DECK OPERATION
You can play a cassette tape in either
cassette deck, and you can record tapes
in TAPE 1.
cassette deck, and you can record tapes
in TAPE 1.
LOADING A TAPE
1. Take up any slack in the tape by
turning the cassette’s hub with a
pencil or your finger. If you do not
remove excess slack, the tape might
become tangled in the record/play-
back mechanism. Avoid touching
the tape.
pencil or your finger. If you do not
remove excess slack, the tape might
become tangled in the record/play-
back mechanism. Avoid touching
the tape.
2. Press
STOP/EJECT
to open
the cassette compartment.
3. Load the cassette tape with its open
edge facing down, the side you want
to play or record on facing out, and
the full reel to the left.
to play or record on facing out, and
the full reel to the left.
4. Close the compartment door.
PLAYING A TAPE
You can play a cassette tape in either
TAPE 1 or TAPE 2, or you can load cas-
sette tapes in both decks and play one
side of each consecutively.
TAPE 1 or TAPE 2, or you can load cas-
sette tapes in both decks and play one
side of each consecutively.
Warning: To protect your hearing, set
MASTER VOLUME
to
MIN
before you play
a cassette tape.
Normal Play
Follow these steps to play a cassette
tape in TAPE 1 or TAPE 2.
tape in TAPE 1 or TAPE 2.
1. Load a cassette tape in TAPE 1 or
TAPE 2.
2. Press
POWER
to turn on the system.
The
POWER
indicator lights.
3. Set
FUNCTION SELECTOR
to
TAPE
.
4. Press
PLAY
on the deck where
the tape is loaded.
5. Adjust the sound with the controls
explained in “Adjusting the Sound”
on Page 12.
on Page 12.
6. Press
STOP/EJECT
to stop the
tape. Press
STOP/EJECT
again to open the cassette compart-
ment, then remove the cassette
tape.
ment, then remove the cassette
tape.
32-1166.fm Page 17 Wednesday, November 17, 1999 4:51 PM