Olitec RW400G 사용자 설명서

다운로드
페이지 65
 
Chapter 5: Configuring the Router 
This chapter describes each web page's key functions. 
5.1 login 
 
After your successful login, you can configure and manage the router. There are ten main 
menus on the left of the web-based utility. Submenus will be available after you click one 
of the main menus. The ten main menus are: Status, Quick Setup, Network, Wireless, 
DHCP, Forwarding, Security, Static Routing, DDNS and System Tools. 
On the right of 
the web-based utility, there are the detailed explanations and instructions for the 
corresponding page. To apply any settings you have altered on the page, please click the 
Save
 button.   
There are the detailed explanations for each web page's key functions below.   
5.2 Status 
The Status page displays the router's current status and configuration. All information is 
read-only. 
1. LAN 
This field displays the current settings or information for the LAN, including the MAC 
address, IP address and Subnet Mask.
 
2. Wireless 
This field displays basic information or status for wireless function, including Wireless 
Radio, SSID, Channel, Mode, Wireless MAC address and IP address.
 
3. WAN 
These parameters apply to the WAN port of the router, including MAC address, IP 
address, Subnet Mask, Default Gateway, DNS server 
and WAN connection type
If PPPoE is chosen as the WAN connection type, the Disconnect button will be 
shown here while you are accessing the Internet. You can also cut the connection by 
clicking the button. If you have not connected to the Internet, a Connect button will be 
shown, you can then establish the connection by clicking the button. 
4. Traffic 
Statistics 
This field displays the router's traffic statistics.   
5.  System Up Time 
The time of the router running from it's powered on or reset
. 
 
 - 
11 -