Ohaus ohaus indicator cd-11 사용자 설명서

Press the G/N/T/

button, Stb OFF is displayed.

When set to Stb ON, allows only stable weight values to be printed.  When set
Stb OFF, prints immediate value with stability indication.  In LFT, fixed to Stb ON.

Press the PRINT/

     button for selections Stb ON or Stb OFF. Default setting is

OFF.

Press the G/N/T/

button to end this block, SAVE is displayed.

Press the G/N/T/

button to save the Print menu settings.  The next menu

LOCSW is displayed.

Press the PRINT/

Units 

button to go back to the rEAd menu without saving.

NOTE:If initial setup, go to the next paragraph.  To exit from the SEtuP, press
the PRINT/

 button to skip to LOCKSW, then Quit.  Press the G/N/T/

button to go back to the weighing mode.

The Lockout menu (LOCSW) allows the user to lock and unlock the settings in the CAL, SEtuP, rEAd, and Print
menus to prevent tampering or accidental changes.  When used in conjunction with the Lock Switch (jumper)
on the printed circuit board, the CAL, SEtuP, rEAd and Print menus can be read only and not changed.

To select any of the items in the LOCSW menu, proceed as follows:
NOTE: If entering from the preceeding menu, disregard the first step.

With the Indicator ON, press and hold the     G/N/T/

button until MEnU is

displayed.  When the G/N/T/

button is released, CAL is displayed, then

press the PRINT/

Units 

button until LOCSW is displayed.

or