Nuvo Home Theater System NV-E6D-UK 사용자 설명서

The P2100 is specifically designed for use with the NuVo 
Systems' lineouts. It can be used with either the fixed or variable 
lineouts on the Essentia with either a 1/8” (3.5mm) to 1/8” 
stereo patch cable or a 1/8” stereo to RCA patch cable, Fig 21. 

There are two methods for triggering the NuVo P2100 from the 
Essentia outputs.  One is to set the POWER MODE switch on the 
P2100 to Audio (the extreme left position) and allow an 
incoming audio signal from the Essentia System to turn on the 
P2100. The second method is to place the POWER MODE switch in 
the AC/DC  (extreme right) position. This will turn on the P2100 
when the Essentia is on. An additional feature of Essentia is zone 
specific triggers that will trigger the P2100 only when that zone 
is turned on. 

Utilizing the voltage trigger requires a mono 1/8” (3.5mm) patch 
cable from either the System ON output on the Essentia to the 
P2100 Voltage trigger input, or from the specific Zone Trigger on 
the Essentia to the Voltage Trigger on the P2100, Fig. 22.

SUM1

1

2

2

3

1

3

5

2

4

6

SUM2

5

4

5

6

1

2

3

4

5

6

1

2

3

4

5

6

The RS232 port allows external two-way communication with the 
Essentia System. Home automation systems such as Crestron and 
AMX can be set up to operate Essentia. The RS232 addendum 
contains the necessary command sets for communication with 
the Essentia System.