Nuance comm Server D60709-22 사용자 설명서
1 Introduction
D60709-22
5
1
Introduction
1.1
SafeCom Go Sharp
SafeCom Go Sharp is the embedded solution for Sharp MFPs. It integrates with
the touch-screen control panel of the Sharp MFP and offers user authentication
by code and/or card.
SafeCom Go Sharp works together with the SafeCom G4 Server software and is
designed to help companies and organizations gain control over their printing
costs and document security. The SafeCom solution can be enhanced with add-
on modules to build customer specific and scalable solutions.
SafeCom Go Sharp is available in two variants:
the touch-screen control panel of the Sharp MFP and offers user authentication
by code and/or card.
SafeCom Go Sharp works together with the SafeCom G4 Server software and is
designed to help companies and organizations gain control over their printing
costs and document security. The SafeCom solution can be enhanced with add-
on modules to build customer specific and scalable solutions.
SafeCom Go Sharp is available in two variants:
SafeCom Device Server (2)
Software is installed on a server and an optional card reader, which
supports keyboard (1.3), is connected to the USB port of the Sharp
device.
Software is installed on a server and an optional card reader, which
supports keyboard (1.3), is connected to the USB port of the Sharp
device.
SafeCom Controller (3)
The SafeCom Controller hardware is connected to the network outlet and
the Sharp device is connected to the spare network port of the SafeCom
Controller. An optional card reader (1.3) can be connected to either the
USB or serial port of the SafeCom Controller.
The SafeCom Controller hardware is connected to the network outlet and
the Sharp device is connected to the spare network port of the SafeCom
Controller. An optional card reader (1.3) can be connected to either the
USB or serial port of the SafeCom Controller.
1.2
Requirements
SafeCom Go Sharp supports Sharp OSA (Open Systems Architecture) MFPs
with Access Control. SafeCom Go is available in two variants, one that is
software based (SafeCom Device Server) and one that is hardware based
(SafeCom Controller). Refer to Table 1 on page 6 to see which Sharp
models are supported by the two variants.
with Access Control. SafeCom Go is available in two variants, one that is
software based (SafeCom Device Server) and one that is hardware based
(SafeCom Controller). Refer to Table 1 on page 6 to see which Sharp
models are supported by the two variants.
The selected card reader (SafeCom ID Device) must be supported by the
SafeCom Controller / SafeCom Device Server. Refer to Table 2 on page 7.
SafeCom Controller / SafeCom Device Server. Refer to Table 2 on page 7.
Sharp MFP must have a hard disk drive and a network card.
Sharp product key for the Sharp External Account Module (MX-AMX3)
MUST be registered on the MFP.
MUST be registered on the MFP.
Sharp AR models require Network Scanning Expansion Kit.
SafeCom device license.
The SafeCom Device Server
REQUIRES
Java Runtime Environment (JRE)
version 1.6 or later. It can run on the same physical hardware as the
SafeCom Server. If SafeCom Device Server is installed on a 64-bit
operation system, a Java version 32-bit needs to be installed. JRE can
be downloaded from www.java.com.
SafeCom Server. If SafeCom Device Server is installed on a 64-bit
operation system, a Java version 32-bit needs to be installed. JRE can
be downloaded from www.java.com.