Nikon Universal Remote WR-1 사용자 설명서
9
Step 3: Pair the Units
Step 3: Pair the Units
Follow the steps below to pair the units. Units can be paired only
with other devices on the same channel.
with other devices on the same channel.
1
Set the units to pairing mode.
Press the MENU button to display
the menus, then highlight PAIRING
in the LINK MODE menu and press
z. Repeat for the second unit.
the menus, then highlight PAIRING
in the LINK MODE menu and press
z. Repeat for the second unit.
2
Display the
PAIRING menus.
Highlight PAIRING and press 2. Re-
peat for the second unit.
peat for the second unit.
3
Select
EXECUTE on both units.
Place the units close together, then highlight
EXECUTE
EXECUTE
and press z on both devices si-
multaneously.
If pairing is successful, the message at right
will be displayed and the LED will fl ash al-
ternately red and green. If the message NO
RESPONSE
will be displayed and the LED will fl ash al-
ternately red and green. If the message NO
RESPONSE
is displayed, repeat Step 3.
The menus will be displayed when pairing is
complete. Press the MENU buttons to close
the menus.
complete. Press the MENU buttons to close
the menus.
LED