Nikon Printer Accessories AW110 참조 매뉴얼

F9

Te
chni

cal 
Not

e

s an

d In

de
x

If the camera fails to function as expected, check the list of common problems 
below before consulting your retailer or Nikon-authorized service representative. 
Refer to the page numbers in the right-most column for more information.
• See “Error Messages” (

E89) for more information.

Problem

Cause/Solution

A

The camera is on 
but does not 
respond.

• Wait for recording to end.
• If the problem persists, turn the camera off. If the camera does 

not turn off, remove and reinsert the battery or batteries or, if 
you are using an AC adapter, disconnect and reconnect the AC 
adapter. 
Note that although any data currently being recorded will be 
lost, data that have already been recorded will not be affected 
by removing or disconnecting the power source.

–
21

Camera cannot be 
turned on.

Battery is exhausted.

Camera turns off 
without warning.

• Battery is exhausted.
• If no operations are performed for a while, camera has turned 

off automatically by auto off to save power.

• Inside of the camera has become hot. Leave the camera off 

until the inside of the camera has cooled.

• At low temperatures, the camera and the battery may not 

function normally.

–

The monitor is 
blank.

• Camera is off.
• Battery is exhausted.
• Standby mode for saving power: Press the power switch, 

shutter-release button, A button, 

c button or b (e 

movie-record) button.

• When flash lamp flashes, wait until flash has charged.
• Camera and computer are connected via USB cable.
• Camera and TV are connected via audio/video cable or HDMI 

cable.

• Camera and smart device are connected using Wi-Fi 

connection and the camera is operated by remote control.

Monitor screen is 
hard to see.

• Adjust monitor screen brightness.

• Monitor is dirty. Clean monitor screen.