New Transducers 250C 사용자 설명서

The Fishfinder 250/250C must be properly installed according to 

the following instructions to get the best possible performance. To 

complete the installation, you need the appropriate fasteners and 

tools. Verify that all cables can reach the unit mounting location, and 

take time to read through these instructions prior to installation. Be 

sure to always wear safety goggles and a dust mask when drilling, 

cutting, or sanding. If you experience difficulty installing the unit, 

Choose a location that provides optimal viewing as you operate 

the vessel and allows easy access to the unit’s keypad. Select a 

mounting surface capable of supporting the weight of the unit and 

protecting it from excessive vibration and shock. DO NOT mount 

the unit in an area exposed to extreme temperature conditions. When 

installing the mounting bracket, allow room for the routing and 

connection of the power and transducer cables.

The Fishfinder 250/250C’s compact, waterproof case is suitable 

for mounting in exposed locations or at the nav station. The unit 

comes with a swivel-mount bracket that can be used for console or 

overhead mounting.

When choosing a location for the unit, consider the following 

conditions:

•

  There should be at least a 3” (8 cm) clearance behind the case 

to allow connection of the transducer and power/data cables.

•

  The mounting surface should be sturdy enough to support the 

unit and protect it from excessive vibration and shock.

 

G

ETTING

 S

TARTED

 > 

I

NSTALLATION