New Transducers TR-5001 사용자 설명서

 

Features

 

•

  Support Pentium 4 Prescott (90nm) and Northwood(0.13um) CPU 

with 400/533/800M FSB speed selectable. Intel VRD 10.1 

compliant to support future advanced processor. 

•

  Dual Channel Memory bus doubles the data rate, up to 

6.4GBytes/s. System memory speed can be DDR266,330 or 400, 

selectable by BIOS setup. 

•

  Dual SATA ports with classic IDE, RAID0 or RAID 1 mode 

configurable. Rebuild supported at RAID 1 mode with Intel IAA 

software. 

•

  Dual Intel Gigabit Ethernet controller on board boost networking 

throughputs up to 4Gbits/s in full-duplex mode. 

•

  Support Server-grade LAN features like Teaming, 

Load-balancing and Fault-Tolerance in wire-speed. 

•

  Boot Agent with both RPL and PXE protocol support is integrated 

in system BIOS for remote Boot functions. 

•

  LAN LED built-in RJ45 connector to display Speed, Link an 

activities. External connector is available to display LAN status 

on front Panel. 

•

  Two serious ports. One is RS232/422/485 selectable for remote 

control and data access. 

•

  AC97 3D Audio CODEC on-board with Line-IN, Line-OUT, 

Microphone and CD-IN interface. Audio + USB 2.0 cable kit is 

available. 

•

  One LVDS connector supports diffused LVDS TFT 18-bits panels. 

LVDS cable kit is available. 

•

  On-Board AT-P8 and ATX-12V Power connector support 

stand-alone system configuration. 

•

  Four USB2.0 ports. USB2.0 cable kit is available to mount UBS 

connector on chassis or bracket. 

•

  Support Hardware Monitor and Watch-Dog timers. System will 

alert administrators while abnormal operation condition 

happened. 

•

  Support remote wake up on LAN and Modem.