Netgear WNDA3100v3 사용자 가이드

Click the Other button.

The IP address and other details display. For more information, see 

The adapter LED lights blue when it connects to a WiFi network. The LED blinks if you are 
using WPS to connect to a WiFi network. 

If the LED does not light, try the following suggestions:

Remove and reinsert the adapter.

Check the Windows device manager to see if the adapter is recognized and enabled. 
Reinstall the adapter software, if necessary.

Insert the adapter into a different USB port on your computer if one is available.

Try the following tips:

Before you use the adapter to join a WiFi network for the first time, you must install the 
adapter software or drivers. See 

Make sure that your adapter is inserted securely into the USB port on your computer.

The adapter LED lights blue when the adatper is inserted.

Use the adapter’s NETGEAR genie to check the status:

a. Click the adapter’s NETGEAR genie icon 

 on your desktop or in the Windows 

system tray.

The Home screen displays a diagram that shows the status of the adapter’s WiFi 
connection.

b.  Check the color-coded line between the computer and the router in the diagram. 

When the adapter is not connected to any WiFi network, a red dashed line is 
displayed.

If the diagram shows a green line between the computer and the router, the adapter is 
connected to a WiFi network. You might be connected to the wrong WiFi network, or 
the WiFi network’s Internet connection might not be working. 

c.  To connect to a different network, click the Join a Network button and select the 

correct WiFi network.

If the network uses WiFi security, make sure that you use the correct WiFi security 
settings or use Push 'N' Connect if the network supports WPS.

Some networks restrict use to only computers or WiFi devices with known MAC 
addresses. If that is the case, follow the steps in