Netgear LG2200D 사용자 가이드

You can use the LEDs on the front panel of the router for troubleshooting.

After you turn on power to the router, the following sequence of events should occur:

The Power LED 

 lights amber within a few seconds, indicating that the self-test is 

running.

After about 30 seconds, verify the following:

The Power LED lights solid white.

The Internet LED is lit.

Make sure that the power cord is securely connected to your router and that the power 
adapter is securely connected to a functioning power outlet. 

Check that you are using the 12 V DC, 2.5A power adapter that NETGEAR supplied for 
this product.

If the Power LED blinks slowly and continuously, the router firmware is corrupted. This 
can happen if a firmware upgrade is interrupted, or if the router detects a problem with the 
firmware. If the error persists, you have a hardware problem.

When the router is turned on, the Power LED lights amber for about 20 seconds and then 
lights white. If the LED does not turn white, the router has a problem.

If the Power LED is still amber one minute after you turn on power to the router:

Turn off the power and then turn it back on to see if the router recovers.

Press and hold the Restore Factory Settings button.

The router returns to its factory settings. 

114.

When the router is turned on, the LEDs turn on for about 10 seconds and then turn off. If all 
the LEDs stay on, there is a fault within the router.

If all LEDs are still on one minute after power-up:

Cycle the power to see if the router recovers.

Press and hold the Restore Factory Settings button to return the router to its factory 
settings. For more information, see 

114.