Netgear LG2200D 사용자 가이드
Set Up an Ethernet WAN Internet Connection
121
U.S. Cellular® 4G LTE™ Router (LG2200D)
IPv6
You can use this feature to set up an IPv6 Internet connection type if genie does not detect it
automatically.
automatically.
To set up an IPv6 Internet connection type:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
network.
2.
Enter http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > IPv6.
5.
In the Internet Connection Type list, select the IPv6 connection type.
Your Internet service provider (ISP) can provide this information.
•
If your ISP did not provide details, you can select IPv6 Tunnel.
•
If you are not sure, select Auto Detect so that the router detects the IPv6 type that is
in use.
in use.
•
If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, select
Auto Config.
For more information about Internet connection types, see the following sections.
6.
Click the Apply button.
Your changes take effect.
Requirements for Entering IPv6 Addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by
colons. Any four-digit group of zeros within an IPv6 address can be reduced to a single zero
or altogether omitted.
colons. Any four-digit group of zeros within an IPv6 address can be reduced to a single zero
or altogether omitted.
The following errors invalidate an IPv6 address: