Netgear LG2200D 사용자 가이드

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless 
connection to the base station.

If you are using the router as the base station with a non-NETGEAR router as the repeater, 
you might need to change more configuration settings. In particular, disable the DHCP server 
function on the access point that is the repeater.



Launch an Internet browser from a computer or wireless device that is connected to the 
network.

Enter http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays. 

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home screen displays.

Select Wireless and verify that the wireless settings match the base unit exactly. 

The wireless security option must be set to None.

Select ADVANCED > Wireless Repeating Function.

Select the Enable Wireless Repeating Function check box.

Select the Wireless Repeater radio button.

In the Repeater IP Address field, type the IP address of the repeater router. 

This IP address must be in the same subnet as the base station, but different from the 
LAN IP address of the base station.

To prevent wireless clients from associating with the repeater and allowing LAN client 
associations only, select the Disable Wireless Client Association check box.