Netgear LG2200D 사용자 가이드
Hardware Setup
9
U.S. Cellular® 4G LTE™ Router (LG2200D)
Front Panel
The router front panel has buttons and status LEDs. Use the LEDs to verify status and
connections.
connections.
WiFi
WPS
Power Internet
USB
LAN
Signal
WAN
Quality
Figure 2. Router front view
Table 1. LED and button descriptions
LED
Description
Signal
Quality
Quality
•
5 bars. Excellent coverage.
•
4 bars. Strong coverage.
•
3 bars. Moderate coverage.
•
1 bar. Poor coverage.
•
Off. No coverage.
Power
•
Solid white. The router is powered on and ready.
•
Blinking red (slow). The router firmware us updating.
•
Solid red. This LED lights red when the router is booting. If it stays red, this indicates a
system failure or that the router has overheaded.
system failure or that the router has overheaded.
•
Off. No power is supplied to the router.
Internet
•
Solid white. The Internet connection is ready.
•
Solid red. Network error.
•
Blinking red. The traffic meter limit has been reached and Internet traffic is blocked.
•
Off. No Internet connection is detected.
Ethernet
LAN
LAN
•
Solid white. One or more local Ethernet ports have detected wired links.
•
Off. The router does not detect links on these ports.
USB
•
Solid white. The router has accepted the USB device. The USB device is ready to be used.
•
Off. No USB device is connected or someone clicked the Safely Remove Hardware button,
and it is now safe to remove the attached USB device.
and it is now safe to remove the attached USB device.
WAN
•
Solid white. An Ethernet WAN device is connected and is working.
•
Solid blue. Mobile WAN is in use.
•
Off. No Ethernet WAN Internet connectivity.