Netgear LG2200D 빠른 설정 가이드

4G LTE not available in all areas. See your service provider for complete coverage details. LTE is a 

trademark of ETSI. NETGEAR, the NETGEAR logo, and NETGEAR genie are trademarks and/or 

registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. 

Other marks are the property of their respective owners. © 2014 NETGEAR, Inc. All rights reserved.

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA

Connect the power adapter to the router and plug it into an electrical outlet.

If no LEDs light, press the Power On/Off button on the rear panel to power 

on the router.

Connect your router to a computer.
To connect from your wireless device using WiFi, use the WiFi network 
name and password on the router label.
For a wired connection, use an Ethernet cable to connect your computer to 
an unused yellow Ethernet LAN port on your router.
To connect wirelessly, press the WPS button 

 

on the front of the router. 

Within two minutes, press the WPS button on your wireless device, or follow 
the WPS instructions that came with the device. For more information, refer 
to the user manual at

.

If you purchased the router online, you might need to provide ICCID and 

MEID(DEC) values to activate the router. These values display on the product 
packaging.

When you connect to the network, you can use a web browser such as Chrome, 
Firefox, or Internet Explorer to access the router to view or change its settings.

Launch a web browser from a computer or wireless device that is 

connected to the network.

Type http://routerlogin.net or http://www.routerlogin.com in the 

address field of the browser.

A login screen displays. 

Enter your user name and password. 
The default user name is admin and the default password is password. 
The BASIC Home screen displays.For more information, refer to the 4G 
LTE Router (LG2200D) User Manual on 

.

To verify the mobile Internet signal quality, check the Signal Quality LED 

.

To improve signal quality, adjust the antennas or move the router.
When the router connects to the Internet, the Internet LED 

 

lights 

white. 

Once you have set up your router, you can use NETGEAR genie for tasks such 
as creating parental controls, changing your security settings, and monitoring 
your Internet usage.

If the router cannot detect the SIM card, the message No SIM Card 

Detected displays and the NETGEAR genie Mobile Internet pane shows Not 
Connected. If you see this message, unplug the router and reseat the SIM card.

The front panel of the router includes the following LEDs and buttons:

 

Signal Quality of the mobile broadband service

 Power

 

Internet

 

Ethernet LAN ports 1–4

 USB ports

 

WAN Internet port

 

WiFi On/Off button

 

WPS button

If the login screen does not display, try the following:

Close and reopen the browser. 

Make sure that your computer is connected to one of the four yellow Ethernet 

LAN ports on the router, or that you are connected to your WiFi network.

Make sure that the router has full power, and that its Power LED 

 is lit.

If your computer is set to a static or fixed IP address, change it to obtain an IP 

address automatically from the router.

LG2200D_IG_19Mar2014.fm  Page 2  Wednesday, March 19, 2014  11:20 AM