Navigon MN4 사용자 설명서

User's manual BLUE Edition 

Installation and quick-start guide 

- 15 -  

 

1. Connect the clamp   and the mounting plate  . Pull the 

clamp round the handle bar as represented above (opening 

up, plate towards the driver). Do not forget to put the rubber 
band   which is included in the delivery between the handle 

bar and the clamp. The clamp is flexible, so you can open it 
carefully, place it round the handle bar and close it.  

2.  Put the cradle of the device   onto the mounting plate  . 

Push the holder downwards until it snaps in noticeably. Please 
note that there is only one correct position for the holder to 
be fitted. 

3.  Fix the complete holder kit with the included screw  . Fasten 

the screw only slightly for the moment. 

 

4.  Insert the device into its cradle. Verify that the clip snaps 

noticeably!  

5.  Turn the holder until you may read the screen well while 

sitting on the bike. 

6.  Fasten the screw.