National Instruments Welding System 321645c-01 사용자 설명서
Appendix A
Status Codes
NI-DAQ FRM for PC Compatibles
A-2
©
National Instruments Corporation
–10007
badChanError
A channel is out of range for the board
type or input configuration; or the
combination of channels is not allowed;
or the scan order must be reversed
(0 last).
type or input configuration; or the
combination of channels is not allowed;
or the scan order must be reversed
(0 last).
–10008
badGroupError
The group is invalid.
–10009
badCounterError
The counter is invalid.
–10010
badCountError
The count is too small or too large for
the specified counter; or the given I/O
transfer count is not appropriate for the
current buffer or channel configuration.
the specified counter; or the given I/O
transfer count is not appropriate for the
current buffer or channel configuration.
–10011
badIntervalError
The analog input scan rate is too fast for
the number of channels and the channel
clock rate; or the given clock rate is not
supported by the associated counter
channel or I/O channel.
the number of channels and the channel
clock rate; or the given clock rate is not
supported by the associated counter
channel or I/O channel.
–10012
badRangeError
The analog input or analog output
voltage range is invalid for the specified
channel.
voltage range is invalid for the specified
channel.
–10013
badErrorCodeError
The driver returned an unrecognized or
unlisted error code.
unlisted error code.
–10014
groupTooLargeError
The group size is too large for the board.
–10015
badTimeLimitError
The time limit is invalid.
–10016
badReadCountError
The read count is invalid.
–10017
badReadModeError
The read mode is invalid.
–10018
badReadOffsetError
The offset is unreachable.
–10019
badClkFrequencyError
The frequency is invalid.
–10020
badTimebaseError
The timebase is invalid.
–10021
badLimitsError
The limits are beyond the range of the
board.
board.
Table A-1. Status Code Summary (Continued)
Status Code
Status Name
Description