Kreisen 3 8 6 X / X E 사용자 설명서

If you are to mount the internal hard disk drive inside the main

system unit case, follow the steps below:

the cover from the main system unit, as described

above.

Remove mounting plate by unscrewing the hold down

screws.

Attach the hard disk drive to the mounting plate by
installing the four mounting screws through the bottom of
the plate into the bottom of the drive frame.

Replace the mounting plate onto the mounting frame by

sliding the plate into the two openings provided in the

mounting frame.

Replace the hold down screws.

Connect the hard disk drive controller cables to the drive.

Replace the main system unit cover.