Kettler 2533 전단

Ocean Comfort products are constructed from HDPE (High Density Polyethelene), primarily a 

recycled material. UV inhibitors are also added to resist fading. Simply maintain your furniture by 

cleaning with soap and warm water to ensure its long lasting beauty. A soft bristle brush can be used 

on any tough to clean stains. Stainless steel hardware is used in the assembly of these products and 

should be rinsed regularly with fresh water if being used in a coastal environment.

Ocean Comfort products are guaranteed for a period of 20 years (for residential use) and 5 years (for 

commercial use), starting from original purchase date. This warranty covers defects in materials and/or 

workmanship and does not apply to the hardware. 

Warranty not applicable to any products deemed as misused, abused or damaged due to an uncontrollable act 

of nature.

5.

a. Bolt the left and right side braces onto the front legs 

by aligning the predrilled holes and inserting a 1/4 - 20 

x 2 1/2” Bolt. Clean any plastic residue from the bolt 

then slide a washer on. Screw on the locknut and then 

tighten it with the wrench and phillips screwdriver.
b. Then align the side braces to the holes on the 

back legs, place the short brace across between them 

aligning with the predrilled holes. Insert the 1/4 - 20 

x 2 1/2” thru the leg, in thru the side brace and into 

the short brace. Tighten with the phillips screwdriver.  

6.

   Place the footrest on the side braces align the front 

predrilled holes and insert the 1/4 - 20 x 2” Bolts through the 

footrest and into the end hole of the brace then tighten it with the 

phillips screwdriver. 

6.

5.