Kenwood MGR-E8 사용자 설명서

MGR-E8

The Line output can be used to connect an external component such as a speaker 

with built-in amplifier.

The USB connector can be used to connect an external component such as a stereo 

set with USB capability.

FM transmitter

Speaker with built-in 
amplifier

Cable with stereo mini-plugs

Stereo amplifier

Car stereo

1 

Switch this unit ON

2 

Connect an external component

Connect it to the [LINE OUT] terminal of this unit.

 

• Prepare an optimum audio cable (commercially available) according to the input 

terminal of the connected external component.

• When using a FM transmitter, noise may be interfered depending the installation 

environment, including the vehicle model, devices in the surroundings and the 
antenna positioning.

• Do not use or leave this unit or connected component in an automobile 

compartment with high temperatures. Otherwise, equipment failure may result.

• During monitoring of the recorded audio through the speaker(s) of the external 

component, a howling sound may be produced if the speaker(s) is too close to 
the microphone. If this happens, increase the distance between the microphone 
and speaker(s) or reduce the speaker monitoring volume.

B60-5825-08_00_MGR-E8(E)_English_1AJ6P1P0109--(XE0).indd   52

B60-5825-08_00_MGR-E8(E)_English_1AJ6P1P0109--(XE0).indd   52

10/08/04   13:48

10/08/04   13:48