Olympus MAUSB-200 전단
USB Read/Write Memory Adapter
MAUSB-200
Introduction
Before getting started
Thank you for purchasing our product. The MAUSB-200 USB
Read/Write Memory Adapter (hereinafter referred to as “the
adapter”) is designed exclusively for reading and writing data to an
xD-Picture Card
Read/Write Memory Adapter (hereinafter referred to as “the
adapter”) is designed exclusively for reading and writing data to an
xD-Picture Card
TM
(hereinafter referred to as “card”). You can
transfer large amounts of data to and from the card quickly and
easily using a computer equipped with a USB port.
Before using the adapter, read this Start Guide carefully.
easily using a computer equipped with a USB port.
Before using the adapter, read this Start Guide carefully.
For more details, refer to the Reference Manual (PDF file) on the
OLYMPUS web site or contact our Customer Support.
MAUSB-200 Reference Manual: http://www.olympus.co.jp/en/
support/imsg/digicamera/download/manual/#mausb
Every effort has been made to ensure that the information in this
leaflet is correct. If you find errors or anything else questionable,
please contact our Customer Support.
Olympus shall not be liable for any damages, passive damages,
or demands from a third party resulting from improper use of the
adapter.
System requirements
Your computer must conform to the following minimum standards in
order to use it with the adapter.
Supported computers
order to use it with the adapter.
Supported computers
● Any computer equipped with a USB interface as standard
(USB Ver. 2.0 or Ver. 1.1 compliant)
Compatible operating systems
● Windows 98/98SE/Me/2000 Professional
(hereinafter referred to as Windows 2000)/XP
● Mac OS 9.0 - 9.2.2/X (v10.1.2 or later)
(hereinafter referred to as Windows 2000)/XP
● Mac OS 9.0 - 9.2.2/X (v10.1.2 or later)
● Versions of Windows 98/Me upgraded from Windows 3.1/95, or
Windows 2000 upgraded from Windows 95/NT 4.0/NT 3.51
may not work properly. In this case, you may need to reinstall
your OS.
may not work properly. In this case, you may need to reinstall
your OS.
● Windows 98/98SE requires you to install a device driver. You
can download this from OLYMPUS web site.
MAUSB-200 Device Driver: http://www.olympus.co.jp/en/
support/imsg/digicamera/download/software/#mausb
VM013502
Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome,
Shinjuku-ku, Tokyo, Japan
Customer support (Japanese language only):
Tel. 0426-42-7499
Shinjuku-ku, Tokyo, Japan
Customer support (Japanese language only):
Tel. 0426-42-7499
Two Corporate Center Drive, P.O. Box 9058,
Melville, NY 11747-9058 U.S.A.
Tel. 1-631-844-5000
24/7 online automated help:
http://www.olympusamerica.com/support
Phone customer support: Tel. 1-888-553-4448 (Toll-free)
Melville, NY 11747-9058 U.S.A.
Tel. 1-631-844-5000
24/7 online automated help:
http://www.olympusamerica.com/support
Phone customer support: Tel. 1-888-553-4448 (Toll-free)
What’s included
The MAUSB-200 Start Guide is
included with the adapter.
Make sure all the following
items are included.
If any items are missing,
immediately inform the shop
where you purchased the
adapter.
included with the adapter.
Make sure all the following
items are included.
If any items are missing,
immediately inform the shop
where you purchased the
adapter.
MAUSB-200
(Adapter and
Cap)
(Adapter and
Cap)
Start Guide (this leaflet)
Names of parts
Status lamp
Cap
Adapter
USB connector
Card slot
Supported cards
xD-Picture Card
16MB/32MB/64MB/128MB/256MB/512MB/1GB (3.3 V)
16MB/32MB/64MB/128MB/256MB/512MB/1GB (3.3 V)
Precautions
Before using the adapter, make sure there is adequate space
around the computer’s USB port so that the adapter can be
connected properly. Plugging in the adapter forcibly may damage
the adapter and/or USB port.
connected properly. Plugging in the adapter forcibly may damage
the adapter and/or USB port.
Start Guide
Declaration of Conformity
Model Number
Model Number
: MAUSB-200
Trade Name
: OLYMPUS
Responsible Party :
Address
Address
: 2 Corporate Center Drive, P.O. Box 9058, Melville,
NY 11747-9058 U.S.A.
Telephone Number : 631-844-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
For customers in USA
For customers in Europe
“CE” mark indicates that this product complies with the European
requirements for safety, health, environment and customer protection.
requirements for safety, health, environment and customer protection.
Safety Precautions <Be Sure to Read This Section>
Please follow the precautions below to ensure proper use and to
avoid injury to yourself or others and damage to property.
avoid injury to yourself or others and damage to property.
CAUTION
WARNING
Signs used in this section
If the adapter is used without observing the
information given under this sign, injury or death
may result.
information given under this sign, injury or death
may result.
If the adapter is used without observing the information
given under this sign, minor personal injury, damage to
the equipment, or loss of valuable data may result.
given under this sign, minor personal injury, damage to
the equipment, or loss of valuable data may result.
Symbols requiring a specific action
Symbols prohibiting a specific action
Mandatory
Prohibited
Unplug from power outlet
Do not disassemble
CAUTION
Precautions on Operating and Storage Environment
Avoid using or storing the adapter in extremely hot or cold
places.
places.
Avoid using or storing the adapter in places with excessive
dirt and dust, or in direct sunlight.
dirt and dust, or in direct sunlight.
Avoid using or storing the adapter in places with strong
vibrations or on unstable surfaces. This may cause equipment
failure.
vibrations or on unstable surfaces. This may cause equipment
failure.
WARNING
Do not disassemble or modify the adapter. Doing so may
cause an electric shock, fire, equipment failure, or accident.
cause an electric shock, fire, equipment failure, or accident.
Do not spill liquid or let metallic objects or anything
flammable get inside the adapter. This could result in a fire,
electric shock, equipment failure, or accident.
flammable get inside the adapter. This could result in a fire,
electric shock, equipment failure, or accident.
Keep the adapter away from infants or toddlers as it
could be accidentally swallowed. If this happens, call a
doctor, emergency or poison control center immediately.
could be accidentally swallowed. If this happens, call a
doctor, emergency or poison control center immediately.
Do not insert anything other than the card into the card
slot. Doing so may cause equipment failure or fire.
slot. Doing so may cause equipment failure or fire.
Before cleaning the adapter, disconnect the USB
connector from the PC. Cleaning the adapter while it is still
connected to the PC via the USB connector may cause an
electric shock.
connector from the PC. Cleaning the adapter while it is still
connected to the PC via the USB connector may cause an
electric shock.
If any devices make strange noises or produce smoke, or
if a foreign object gets inside the adapter, turn off the
device connected to the adapter and unplug it from the
power outlet. Then contact your dealer or authorized
Olympus service center.
if a foreign object gets inside the adapter, turn off the
device connected to the adapter and unplug it from the
power outlet. Then contact your dealer or authorized
Olympus service center.
Avoid using the adapter in a sealed environment.
Before transporting the adapter, make sure that the card has
been removed.
been removed.
Pack the adapter so as not to allow foreign objects get inside
the card slot.
the card slot.
This adapter is a precision instrument. Do not expose it to
vibrations, shocks, or impacts.
vibrations, shocks, or impacts.
Precautions on Transportation
Use a soft cloth to wipe the adapter. If it is very dirty, wipe it
with a soft cloth moistened with a small amount of diluted
neutral detergent first, then wipe off any moisture with a dry
cloth.
with a soft cloth moistened with a small amount of diluted
neutral detergent first, then wipe off any moisture with a dry
cloth.
Cleaning Precautions
Do not apply organic solvent such as thinner, benzine, or
insecticide to the adapter. This may cause the surface of the
adapter to deteriorate and its coating to peel off.
insecticide to the adapter. This may cause the surface of the
adapter to deteriorate and its coating to peel off.
Avoid using the adapter near the objects with strong
magnetism (motors, transformers, televisions, speakers,
magnets, etc.). This may cause malfunctions.
magnetism (motors, transformers, televisions, speakers,
magnets, etc.). This may cause malfunctions.
Notes on formatting the card
● When formatting the xD-Picture Card, make sure that there is
no important data on it. Existing data will not be usable after
the card has been formatted.
the card has been formatted.
● You must format the card on a digital camera regularly. If the
card inserted into the adapter has been formatted with the
connected computer, it may not be recognized by a digital camera.
connected computer, it may not be recognized by a digital camera.
Be sure to format the card on a digital camera regularly.
For details on formatting with a camera, refer to the camera’s
instruction manual.
For details on formatting with a camera, refer to the camera’s
instruction manual.
Card Handling Precautions
If your camera does not recognize a card formatted on
another device, re-format the card with your camera.
(Cards formatted with non-DOS formatting systems are not
recognized by the adapter.)
another device, re-format the card with your camera.
(Cards formatted with non-DOS formatting systems are not
recognized by the adapter.)
The contacts on the card are exposed. Take extra care when
you handle it.
you handle it.
Specifications
Supported Cards
xD-Picture Card 3.3 V
16/32/64/128/256/512MB/1GB
Supported computers
Supported operating
systems
systems
Interface
Operating voltage
Consumption current
Operating environment
Weight
Storage environment
Dimensions
(L x W x H)
USB Ver. 2.0 or Ver. 1.1
5V
±10% (Powered via USB port)
0.5A Max.
Temperature: 0˚C - 40˚C (41˚F - 104˚F)
Humidity: 20% - 80% (No condensation)
Temperature: –20˚C - 60˚C (–4˚F - 140˚F)
Main unit: 71.0 mm x 25.0 mm x 10.1 mm
(Not including the cap and protrusions)
Main unit: Approx. 13 g Cap: Approx. 2 g
Any computer equipped with a USB interface as standard
(USB Ver. 2.0 or Ver. 1.1 compliant)
*
Windows 98/98SE requires you to install a device driver.
Any of the following pre-installed operating systems
Windows 98
Windows 98
*
Windows 98SE
*
Windows Me
Windows 2000 Professional
Windows XP
Mac OS 9.0 - 9.2.2
Mac OS X (v10.1.2 or later)
● The specifications are subject to change without prior notice.
● For the latest information, visit the OLYMPUS web site:
http://www.olympus.com/
● For the latest information, visit the OLYMPUS web site:
http://www.olympus.com/
When disconnecting the adapter from the computer’s USB
port, hold the connector firmly and pull it out gently to unplug
it.
port, hold the connector firmly and pull it out gently to unplug
it.
Other Precautions
Carefully read “Precautions” in “Before getting started” in this leaflet.
USB Connector Handling Precautions
Do not touch the terminal end of the USB connector. Doing so
may cause the adapter and/or the PC to fail.
may cause the adapter and/or the PC to fail.
http://www.olympus.com/
Wendenstr. 14-18, D-20097 Hamburg, Germany
Tel: +49 40-23 77 3-0 / Fax: +49 40-23 07 61
Technical Customer Support: Please visit our
homepage: http://www.olympus-europa.com
or call NUMBER: 00800 - 67 10 83 00 (Toll-free)
+49 180 5-67 10 83 or +49 40-237 73 899 (Charged)
Tel: +49 40-23 77 3-0 / Fax: +49 40-23 07 61
Technical Customer Support: Please visit our
homepage: http://www.olympus-europa.com
or call NUMBER: 00800 - 67 10 83 00 (Toll-free)
+49 180 5-67 10 83 or +49 40-237 73 899 (Charged)
For customers in Canada
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
For customers in North and South America
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate
collection of waste electrical and electronic equipment in the EU countries.
Please do not throw the equipment into the domestic refuse.
Please use the return and collection systems available in your country for
the disposal of this product.
collection of waste electrical and electronic equipment in the EU countries.
Please do not throw the equipment into the domestic refuse.
Please use the return and collection systems available in your country for
the disposal of this product.
In some cases, depending on your computer system’s operating
environment (i.e. hardware, software, and device drivers), the
adapter may not work properly.
adapter may not work properly.
The adapter may not function properly when connected to a PC
via a USB port on a USB hub, keyboard or display. In this case,
connect the adapter directly to the computer’s USB port.
connect the adapter directly to the computer’s USB port.
Do not pull the card out of the card slot, or unplug the
adapter while the status lamp is blinking. Doing so may
destroy data on the card or damage the card.
destroy data on the card or damage the card.
The adapter does not support computer power-saving functions.
Turn off the power-saving function before you use the adapter
with your computer.
with your computer.
It is not possible to connect two or more MAUSB-200 adapters to
a single PC at the same time.
Do not swing the strap while attaching it to the adapter. Avoid
banging the adapter against hard objects.
To attach the cap, align the front
of the cap with the front of the
adapter and slide it into place.
adapter and slide it into place.
Trademarks
● Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
● Apple, Mac, Macintosh, Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
● xD-Picture Card and other company and product names are registered trademarks and/or trademarks of their respective owners in Japan and/or other
● xD-Picture Card and other company and product names are registered trademarks and/or trademarks of their respective owners in Japan and/or other
countries.