jWIN JD-VD520 사용자 설명서

www.jWIN.com  

12 

 Use an S-Video cable (not included) to connect the DVD player to your TV. Use “S-Video” 
setting on the Setup Menu. 

 

Use a COMPONENT cable (not included) to connect the DVD player to your TV. Set the 
VIDEO OUT to COMPONENT. For Progressive Scan, set to P-SCAN. COMPONENT and P-
SCAN is transferred through the same jack. If your TV set supports P-scan function, set VIDEO 
OUT to P-SCAN. If not, set VIDEO OUT to COMPONENT. 
 

1. 

Select the Coaxial digital output. 

2. 

Set the DVD player’s Audio Out to “Raw or “PCM.” 

3. 

Set the digital amplifier to the AV input connected to the DVD player. 

 
Notes on the Connection Diagram 
1. 

You don’t need to connect all the video outputs even though your TV set supports all the 
connections. Choose and make the most appropriate video connection available on your 
TV. The S-VIDEO and the component VIDEO cables aren’t included in the package. 

2. 

The component VIDEO output is labeled as Y, Pr (or Cr), and Pb (or Cb), and these three 
component video output jacks must be all and properly connected to properly display the 
picture in the component video mode of your TV set. 

3. 

After making the video connection of your choice, please ensure that your TV is in the 
proper mode as well. If you choose the component VIDEO connection, your TV must be in 
the component mode. If you choose the S-VIDEO connection, your TV must be in the S-
VIDEO mode. Please refer to the user’s manual of your TV for the detailed mode setting. 

4. 

Some TV sets use the different audio input for each video mode. Please refer to the user’s 
manual of your TV for the detailed setting information. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

www.jWIN.com  

13

 

 
 
 
 
 
 
 
 
 
 
 
1. 

Place the Subwoofer, Center, Right and Left speakers as shown in the above illustration. 

2. 

Perform a Tone Test on the AV amplifier and set the volume to a comfortable listening 
level. 

Note: For best results, sit in the viewing position and have someone adjust the volume for you; 
this will enable you to set the optimal levels. 
 
NOTES FOR CONNECTING TO A TV: 
• 

If your TV has an HDMI input, connect the DVD player with the component cable for best 
results, otherwise use the Component, S-Video or Video OUT jack on the DVD player. 

• 

Set the TV’s TV/VIDEO button or switch to the VIDEO setting. 

• 

When connecting the DVD, refer to the owner’s manuals for the TV and the audio system, 
as well as this manual. 

• 

When connecting, make sure the power is off and all units are unplugged before making 
any connections. 

• 

Connect the DVD player to your TV directly. If you connect the DVD player through a 
VCR, the playback picture will be distorted because DVD video discs are copy protected. 

• 

If using a TV with a blue screen option, turn the option off, on the TV for best results. 

• 

If you place the DVD player near a tuner, the radio broadcast sound might be distorted. In 
this case, move the DVD player away from the tuner.